What Footprint Does the Glock MOS Have? Complete Guide to Models & Mounts
The Glock MOS features various mounting footprints depending on the specific model. Popular options such as the Glock 17, 19, 45, and 47 are compatible with optics that follow the RMR footprint, whereas the Glock 43X MOS and 48 MOS use the Shield RMSc footprint, allowing optics to be mounted without extra adapter plates.
This information benefits Glock owners who want to mount red dot sights on their MOS pistols by clarifying which optics fit directly and which require adapter plates. You will learn which models need plates, common adapters, and how to avoid costly mounting mistakes.
Key Takeaways
- The Glock 17, 19, 45, and 47 MOS models use the RMR footprint for mounting optics.
- The Glock 43X MOS and 48 MOS mount optics on the Shield RMSc footprint without adapter plates.
- The Glock 20 Gen5 MOS requires an adapter plate because it has no native footprint.
- OEM Glock MOS adapter plates cost about $13 and carry the footprint for the optic.
- Aftermarket MOS-to-RMSc plates exist but must be verified for specific Glock models before purchase.
- Red dots like Holosun’s SCS MOS fit some Glock MOS models directly, no plate needed.
What Footprint Does the Glock MOS Use for Optics Mounting?
The standard Glock MOS system uses the Trijicon RMR footprint for optics mounting. This footprint applies to full-size and compact MOS pistols like the Glock 17, Glock 19, as well as the Glock 34, 45, and 47 models. These pistols require a specific adapter plate that screws into the slide, designed to fit RMR-style optics such as the Trijicon RMR, Holosun 407C series, and Shield’s RMSc series when paired with the appropriate plate.
This footprint compatibility matters because it ensures you can select from a wide range of red dot optics built to fit the RMR mounting pattern. The adapter plates included with the Glock MOS models are purpose-built for this footprint, making installation straightforward. You screw the adapter plate into the pre-cut slide recess with the provided screws, following the specified torque, usually around 12 to 15 inch-pounds, to avoid stripping. The optic then mounts directly onto that plate using the optic’s included screws.
All standard Glock MOS pistols share the same basic RMR footprint system, but the exact plate and slide width can vary. For example, the standard MOS (25.5 mm slide width) models like the G17 and G19 use Plate 02 for RMR optics, while wide MOS slides (27.5 mm) like the G20 or G21 require Plate 06, which still supports the RMR footprint but fits the wider slide profile. Slimline MOS models such as the G43X MOS use a different footprint compatible with the Shield RMSc red dots and do not require adapter plates, as the optic mounts directly to the slide using M4 screws.
It is important to confirm which MOS model you have before purchasing an optic or adapter plate. Using the wrong plate or optic footprint can result in poor fitment, misalignment, or inability to secure the optic properly. The RMR footprint is by far the most common among standard MOS pistols, offering an extensive selection of affordable and reliable optics. The cost of an adapter plate is generally low, often included with the pistol or available separately for around $20 to $40, while RMR-style optics commonly range from $250 to $700 depending on the brand and features.
Mounting an optic on a Glock MOS using the RMR footprint yields optimal results, secure fitment, consistent zero retention, and quick-swap capabilities between optics. Problems largely occur if mounting screws are overtightened or if non-compatible plates are used. Ensure to use the Glock factory plates or reputable aftermarket plates designed specifically for the MOS RMR footprint. Because the MOS is an interface rather than a direct optic mount, relying on the correct adapter plate is key for a solid setup. If you want to use optics designed for a different footprint, such as Holosun’s K or Shield’s RMSc on a slimline model, verify you have the proper MOS version or consider models designed for direct mounting without plates.
Which Glock MOS Models Mount Optics Without Adapter Plates?
The Glock 43X MOS and Glock 48 MOS pistols can mount red dot optics directly without needing adapter plates. Their slides are cut to the Shield RMSc footprint, allowing RMSc-pattern optics like the Holosun RMSc models to bolt straight onto the slide using M4 screws. This design eliminates the need for any additional plates, simplifying installation and reducing overall height between the optic and the slide.
Other full-size Glock MOS pistols, such as the Glock 17 MOS and Glock 19 MOS, use the full-size Glock MOS footprint. They require adapter plates to fit different optics footprints. For example, the Holosun SCS-M-GR green dot sight mounts directly on these models without an adapter plate because its footprint matches the factory Glock MOS pattern. Meanwhile, many other red dots such as the Holosun 509 ACSS Vulcan need an adapter plate to fit the standard Glock MOS cut.
Choosing a pistol that matches the optic footprint can save money and time. Direct mounting reduces potential alignment issues and makes swapping optics easier. The 43X MOS and 48 MOS are the main exceptions with their Slimline RMSc-specific cut, which is less common on other Glock MOS pistols.
- Glock 43X MOS and 48 MOS use the Shield RMSc footprint, allowing direct mounting of RMSc optics like Holosun RMSc models
- Full-size Glock MOS pistols (Glock 17, 19 MOS) require adapter plates unless the optic matches the full-size MOS pattern directly
- Holosun SCS MOS fits full-size Glock MOS footprints without an adapter plate
- Mounting optics directly avoids extra height and potential looseness caused by adapter plates
- M4 screws typically secure optics directly on 43X and 48 MOS slides
- Choosing compatible optics limits the need for extra hardware and reduces installation time
Direct fit optics reduce complexity, but using the wrong optic without an adapter can cause poor fit or damage. Make sure you confirm the exact footprint of both your optic and pistol slide before buying to avoid compatibility issues. Installing optics without the correct fit can lead to loose mounts or loss of zero, which impacts accuracy and reliability.
Always use manufacturer-recommended screws and torque specifications to secure your optic directly to the slide, ensuring a solid mount and consistent zero retention.
Common Adapter Plates for Glock MOS and When You Need Them
Several adapter plates exist for Glock MOS pistols to connect different red dot optic footprints. These plates convert the MOS cut on your pistol’s slide to the mounting pattern required by your chosen optic. You’ll need an adapter plate whenever your optic’s footprint does not directly match the Glock MOS cut. To verify compatibility, check both your Glock MOS model and the optic’s footprint, then pick the plate designed to fit that exact combination.
Popular Adapter Plates and Their Footprints
Glock MOS pistols accommodate various adapter plates that align the slide’s MOS cut with popular optic footprints. The most common adapter plate bridges the Glock MOS pattern to the RMSc footprint, a compact, widely used pattern for micro red dot sights. Other plates adapt the MOS cut to less common footprints if needed. Most Glock MOS pistols come with multiple adapter plates to support a range of optics out of the box. Below is a table showing typical adapter plates for Glock MOS pistols, their compatible optic footprints, and associated details:
| Adapter Plate | Supported Footprint | Typical Glock MOS Models | Use Case | Approximate Cost |
|---|---|---|---|---|
| Glock MOS-to-RMSc Plate | RMSc (Shield, Leupold DeltaPoint) | G17 MOS, G19 MOS, G20 Gen5 MOS, others | For mounting RMSc footprint optics | $10, $20 |
| Vortex Viper MOS Plate | Vortex Viper footprint | Various Glock MOS models (model-specific) | Specific for Vortex Viper red dots | $15, $25 |
| Trijicon RMR Direct Fit Plate | Trijicon RMR footprint | Model-specific, often requires specific plates or milling | For Trijicon RMR optics on MOS slides | $20, $30 (if available) |
These adapter plates usually install using the supplied M3x6 mm Torx® screws. Most kits include three screws, two for securing the adapter plate and one extra for the optic. Proper orientation and placement are critical for stability.
Key Factors to Choose the Right Adapter Plate
Choosing the correct adapter plate depends on your Glock MOS model and the footprint of the optic you want to mount. Each plate is specifically designed to fit certain MOS models and convert them to one or more optic standards. Compatibility must be confirmed before buying to avoid ordering the wrong plate.
Your optic uses the RMSc footprint, which many popular micro red dots do, so the standard MOS-to-RMSc adapter plate will usually work. The Glock 20 Gen5 MOS, for example, requires a plate because it does not have a direct optic cut. Checking the manufacturer’s specifications or reliable retailer information for your Glock model and optic will confirm the correct plate choice.
Adapter plates cost in the $10 to $30 range and are a safer, less costly alternative than slide milling. The plates preserve your pistol’s versatility, allowing quick optic swaps without permanent modifications.
Step-by-Step Rules to Determine Plate Necessity
- Check your Glock MOS model number and generation to understand if the slide cut matches your optic’s footprint directly.
- Identify your optic’s footprint: RMSc, Trijicon RMR, Vortex, or other proprietary patterns.
- Consult the manufacturer or trusted dealer to see if your Glock MOS model supports direct mounting of that optic or if an adapter plate is needed.
- When the optic footprint does not match the MOS cut, choose the adapter plate designed to bridge your MOS model with your optic’s footprint.
- Verify the plate’s packaging or listing explicitly matches your Glock model (e.g., G17 MOS or G19 MOS) before purchase.
- Follow safety steps: ensure your pistol is unloaded before installing or removing plates or optics.
These guidelines ensure you don’t spend money on incompatible plates or risk mounting an optic improperly. Using the correct plate reduces chances of movement or damage and keeps your optic secure during shooting.
Step-by-Step Process to Install an Optic on a Glock MOS Slide
Installing an optic on your Glock MOS slide involves removing the factory cover plate, attaching the correct adapter plate with the specified torque, and securely mounting the red dot optic to maintain zero retention. Doing this properly prevents optic shift and ensures reliable shooting performance.
Removing the Factory Slide Cover Plate
The factory slide cover plate on a Glock MOS is designed to protect the optic mounting area and must be removed before installing an adapter plate or optic. This cover plate is typically held in place by a simple latch mechanism that can be lifted with a tool or your fingernail. Removing it creates access to the MOS pattern mounting holes on the slide. Follow these steps to remove the cover plate safely:
- Clear the pistol by removing the magazine and checking that the chamber is empty.
- Lock the slide back and place the slide on a flat surface with the top facing up.
- Use a small flathead screwdriver, a punch, or your fingernail to lift the rear edge of the cover plate.
- Carefully slide or lift the cover plate off the slide to expose the MOS mounting holes underneath.
- Set the cover plate aside; you will not need it if installing an adapter plate.
Installing the MOS Adapter Plate with Correct Torque
Once the cover plate is removed, the adapter plate goes directly onto the exposed MOS screw holes in the slide. Using the correct screws and torque settings is necessary to avoid damaging the slide or losing optic zero during firing. Glock MOS adapter plates usually use two Torx® screws.
Use a calibrated Torx® driver to apply the proper amount of torque, typically between 12 and 15 inch-pounds. Over-tightening can strip the screws or damage the slide, while under-tightening risks optic movement. Here’s how to install the plate:
- Position the MOS adapter plate over the mounting holes, aligning it with the slide’s MOS pattern.
- Insert the two Torx® screws through the adapter plate into the slide’s threaded holes.
- Use a Torx® driver with a torque wrench to tighten the screws evenly to about 12-15 in-lbs.
- Confirm the plate sits flush against the slide without gaps or rocking.
- Double-check screw tightness after initial mounting and again after a few shooting sessions.
Mounting Your Red Dot Optic Securely
With the adapter plate installed, mount your red dot optic directly onto it using the optic’s mounting screws. Proper mounting ensures zero retention, stability, and minimal space between the optic and slide to reduce movement.
The SCS-MOS adapter allows the optic to sit lower, reducing height over bore and improving sight picture. Some plates, like the DOGTAG design, further reduce the gap, securing the optic and preventing it from shifting off zero during recoil. Follow these steps to mount the optic correctly:
- Place the red dot optic on the adapter plate, aligning the screw holes carefully.
- Insert and finger-tighten the optic screws supplied with your optic or adapter plate.
- Use a torque driver set to the optic manufacturer’s recommended torque, often around 10-15 in-lbs, to tighten screws evenly.
- Check that the optic is solid, without movement or play on the adapter plate.
- Perform a function check by manually cycling the slide and lightly tapping the optic to ensure it stays zeroed.
Differences Between Glock MOS Footprints and Other Popular Patterns
The Glock MOS footprint differs from other popular red dot patterns like RMSc and DeltaPoint mainly in its specific mounting plate dimensions and optic compatibility. Glock MOS uses modular adapter plates numbered 05 through 08, each designed for a range of optics with slight variations in slide width and screw hole positions. This modular approach allows the MOS series to fit various optics but requires choosing the right plate or aftermarket adapter to match the optic’s unique footprint.
For example, the RMSc footprint, favored for its compact size and lightweight design, is common among micro red dots used on concealed carry handguns but is not natively supported by Glock MOS without an aftermarket adapter. Meanwhile, the DeltaPoint Pro (DPP) footprint is popular in the pistol red dot market and fits within the Glock MOS system through specific plates like plate 08, which accommodates the wider slide measurements between 27.5 and 28.5 mm.
A key factor in footprint compatibility is the spacing and positioning of mounting screws, which vary between Glock MOS plates and other standards like Trijicon RMR and Aimpoint ACRO. Glock’s native plates cover Docter, Trijicon RMR, Holosun, C-More, and Leupold DeltaPoint Pro footprints, while aftermarket options expand compatibility to ACRO and Holosun 509T among others. Note that Glock’s 2025 partnership with Aimpoint created the A-CUT system for the Aimpoint COA, introducing a dedicated footprint outside existing MOS plates.
| Footprint | Optic Models | Glock MOS Plate Number | Slide Width Compatibility (mm) | Notes |
|---|---|---|---|---|
| Docter | Docter Sights | 05 | Standard Glock MOS | OEM MOS adapter available |
| Trijicon RMR | Trijicon RMR, Holosun | 06 | Standard Glock MOS | Widely supported footprint |
| C-More | C-More Red Dot | 07 | Standard Glock MOS | OEM MOS adapter available |
| DeltaPoint Pro (DPP) | Leupold DeltaPoint Pro | 08 | 27.5 to 28.5 range (wider slides) | Supports wider MOS slides |
| RMSc | Shield RMSc | Aftermarket Plate | Varies | Not natively supported, requires aftermarket |
| Holosun K, 509T | Holosun Models | Aftermarket Plate | Varies | Requires aftermarket adapter plates |
| Aimpoint ACRO | Aimpoint ACRO | Aftermarket Plate | Varies | Available through aftermarket adapters |
Choosing the correct plate ensures your optic aligns properly for a secure fit and accurate sight picture. Using the wrong footprint or mounting plate can cause poor alignment, loose fitment, or even damage to the optic or slide. Aftermarket adapter plates can add cost and complexity but expand your choice to popular optics like the Aimpoint ACRO or Holosun 509T that aren’t supported by factory plates.
Always verify the exact mounting screw hole dimensions and spacing of your optic against the Glock MOS plate specifications before purchase to avoid fitment issues.
Common Mistakes and How to Avoid Them When Mounting Glock MOS Optics
One of the most common mistakes when mounting optics on a Glock MOS involves using the wrong adapter plate. Since MOS pistols typically require an adapter plate to fit an optic securely, selecting the correct one is essential. For example, standard-frame MOS models like the Glock 17, 19, 34, 45, and 47 use adapter plate 02 for optics with an RMR footprint, while wide-frame MOS pistols need plate 06. Double-check your pistol’s frame type and the optic’s footprint before making a purchase to avoid mismatched parts. Failing to do this results in improper fitment, which can lead to optic movement or damage during use.
Incorrect screw torque is another frequent error that can cause problems with Glock MOS optic installation. Over-tightening screws may strip the threads on the adapter plate or optic, warp the mounting plate, or crack the optic housing itself. It’s best to follow manufacturer torque specifications carefully, which usually range between 15 to 25 inch-pounds for mounting screws. Use a torque driver calibrated to these specs to ensure screws are tightened just right. With properly torqued screws, your optic stays secure without risking damage.
Ignoring compatibility between the optic, adapter plate, and the MOS mount system can also lead to failures. Some optics, like those with an RMS footprint, require specific MOS-to-RMS adapter plates. Although the ORS system allows certain optics to mount directly without an adapter plate, this only applies to a few models. Confirm compatibility by consulting the optic manufacturer’s information or trusted vendor resources before installation. This helps avoid spending extra time and money on returns or rework.
Taking the time to verify the exact optic footprint and your pistol’s MOS model helps prevent costly errors. Always inspect the mounting screws and plate holes to ensure alignment matches your optic’s screw pattern exactly. If possible, loosely fit the adapter plate and optic first to check alignment before final installation. This step reduces the risk of stripped screws or cross-threading during tightening.
Using the right tools also matters. A magnetic or hollow ground screwdriver bit matched to the screw heads prevents cam-out, which can damage screw heads and make removal difficult. Avoid using power tools because they often apply too much torque too quickly. Manual torque drivers give better control and protect both the mount and optic.
In some cases, environmental factors like dirt, oil, or debris on screw threads can affect screw tension. Clean the screw threads and apply a tiny drop of medium-strength thread locker if recommended by the optic manufacturer. This improves retention without making future disassembly impossible.
Best Red Dot Optics Compatible with Glock MOS Without Additional Plates
Some red dot optics fit directly on Glock MOS pistols without needing extra adapter plates. These optics are designed with mounting footprints that line up precisely with the MOS slide cutout. Using these reduces the parts needed, lowers installation time, and keeps the setup slimmer. Optics specifically adapted to Glock MOS usually include mounting screws that align with the slide’s pre-cut holes.
The main features to look for in an ideal Glock MOS compatible optic include a matching footprint, durability to handle recoil and use, and clear sight windows with adjustable brightness settings. Lightweight and low-profile models help maintain good grip and handling, especially on compact or full-size MOS pistols. Many manufacturers launched new optics with Glock MOS compatibility in the past few years due to increasing demand.
| Optic Model | Footprint | Size (LXWXH, inches) | Weight (oz) | Price Range (USD) | Key Features |
|---|---|---|---|---|---|
| Trijicon RMR Type 2 | Glock MOS | 1.85 x 1.33 x 0.7 | 1.2 | 450-500 | Adjustable brightness, rugged aluminum |
| Leupold DeltaPoint Pro | Glock MOS | 1.75 x 1.25 x 0.7 | 1.0 | 600-650 | Motion sensor On/Off, wide field of view |
| Holosun 507C X2 | Glock MOS | 1.72 x 1.1 x 0.79 | 1.3 | 350-400 | Solar backup, multiple reticle options |
| Vortex Venom | Glock MOS | 1.7 x 1.0 x 0.8 | 1.4 | 250-300 | Clear glass, simple controls |
| Shield RMSc | Glock MOS | 1.7 x 1.1 x 0.6 | 1.0 | 400-475 | Low profile, waterproof |
These optics usually come with the screws and mounting details needed to attach directly to the Glock MOS cutout. Installation involves removing the factory slide plate, aligning the optic with the MOS holes, and tightening the screws to recommended torque settings, typically around 15 in-lbs. Using thread locker helps keep screws from loosening under recoil.
Choosing a direct-mount optic reduces the risk of compatibility problems common with adapter plates, such as misalignment or added height. However, availability and price vary. Some new optics designed especially for Glock MOS offer features like motion sensors or solar backup, which improve battery life and user convenience. Match the optic’s size and weight to your pistol model and shooting needs for the best handling and performance.
Torque Specifications and Tools for Mounting Glock MOS Optic Plates
Screws for Glock MOS optic plates should be torqued carefully to ensure a secure mount without damaging parts. Use a torque setting between 8 and 12 inch-pounds for M3 x 6mm screws, which are standard for mounting these plates. Employ proper tools like a torque wrench and quality hex drivers, and routinely check the screws to avoid loosening caused by recoil and handling.
Recommended Torque Values for MOS Screws
The M3 x 6mm screws supplied with Glock MOS plates require a torque of 8 to 12 inch-pounds. This range ensures the plate firmly attaches without stressing the screw threads or the slide material. Over-tightening can strip the threads or crack the mounting surface, while under-tightening risks the optic shifting or loosening during shooting.
For the Slimline MOS and MOS-K models, specifications from Glock confirm the same torque range applies. If you have aftermarket adapters, always refer to their provided torque recommendations since material and design vary.
Essential Tools for Installation and Maintenance
The right set of tools is essential for reliable optic mounting and subsequent maintenance. At a minimum, you need a torque wrench capable of measuring inch-pounds accurately and a set of hex bit drivers that fit the M3 screws precisely to avoid stripping.
Consider investing approximately $30 to $50 for a quality torque wrench designed for small screws. Cheaper options often lack the precision necessary to hit the 8-12 inch-pound target consistently. Regular screwdriver sets without torque control can cause uneven pressure and damage, which compromises your optic’s stability.
- Torque wrench with inch-pound scale (8-12 in-lbs range)
- Hex bit driver set (specifically for M3 screws)
- Thread locker (medium-strength, non-permanent)
- Cleaning supplies for screw threads and mounting surface
- Magnifying glass or bright light to confirm proper seating
Using medium-strength thread locker like Loctite 242 or equivalent on each screw can reduce the risk of loosening without making removal difficult. Clean both the screw threads and optic plate before applying any thread locker for best results.
Routine Checks to Maintain Mount Integrity
After mounting your optic, schedule regular inspections to verify screw tightness, especially following its initial installation and after heavy shooting sessions. Check every 100 to 200 rounds or at least once a month during frequent use. Make a checklist to ensure consistent maintenance:
- Visually inspect screws for looseness or corrosion
- Verify torque on each screw with the torque wrench
- Confirm the optic’s zero remains stable (adjust if necessary)
- Reapply medium-strength thread locker if screws loosen
- Clean mounting surfaces and screws
Secure optic mounting is a dynamic process, neglecting to re-check screws can lead to optic failures or damage to your MOS slide.
Maintaining proper torque and cleanliness improves the lifespan of the mounting plates and screws and ensures consistent shooting accuracy. Growth in screw looseness is often gradual but significant enough over time to disrupt your optic’s performance without regular attention.
Step-by-Step Action Plan for Mounting Your Red Dot on a Glock MOS
Follow these steps to securely mount a compatible red dot optic on your Glock MOS pistol and ensure reliable performance.
- Before you start: Verify your Glock MOS model and identify the correct optic footprint or adapter plate needed by consulting your pistol’s manual or manufacturer website.
- Gather tools: Collect a proper torque screwdriver and the mounting screws specified by the optic manufacturer; using correct tools prevents damage and ensures a stable mount.
- Prepare the slide: Remove the factory cover plate from the MOS cutout, and clean the mounting area of any debris or oil to guarantee solid contact with the optic or adapter plate.
- Attach the adapter plate (if needed): Align the plate’s screw holes with the slide’s mounting holes, then hand-tighten screws evenly before using a torque screwdriver to apply the recommended torque, typically 15-20 inch-pounds.
- Mount the optic: Place the red dot sight onto the adapter plate or directly onto the slide if no plate is needed, then tighten mounting screws in a crisscross pattern to the specified torque to avoid misalignment.
- Check alignment: Perform a bore sighting or live fire test to confirm the optic’s point of impact matches your aiming point; adjust the sight as needed according to the optic’s instructions.
- Final inspection: Confirm all screws are torqued correctly and the optic sits flush without wobble; loose mounts can cause inaccurate shots and damage the pistol.
- Maintenance: Routinely check screw tightness after shooting sessions to maintain mounting integrity and optic performance.
Frequently Asked Questions
What Optics Fit Directly on Glock MOS?
Holosun SCS MOS and Trijicon RMR pattern optics fit directly on Glock MOS without adapter plates. Using these ensures a clean, integrated mount straight to the slide.
Is Glock MOS the Same Footprint as RMR?
Glock MOS uses a unique footprint similar but not identical to the RMR. Full-size MOS pistols need plates for RMR optics, while slimline MOS pistols can mount RMSc optics directly.
Will a Holosun Fit on a Glock MOS?
Yes, Holosun optics like the SCS MOS fit directly on full-size Glock MOS slides without adapter plates. Some models require plates depending on the MOS variant.
What Optic Fits a Glock 19 MOS Without an Adapter Plate?
The Glock 19 MOS requires an adapter plate to fit RMR footprint optics; no optics fit it directly without one. Use Plate 02 for compatibility.
Does the Glock 43X MOS Require Adapter Plates?
The Glock 43X MOS uses a slimline cut for Shield RMSc footprint optics and fits them directly without adapter plates.
Can You Switch Optics Between Different Glock MOS Models Easily?
Switching optics between MOS models often requires changing adapter plates due to varying footprint sizes. Always check compatibility before mounting.
Wrapping Up
The Glock MOS uses a modular footprint designed to fit multiple popular optic patterns, simplifying the process of mounting your red dot sight. Choosing a compatible optic or the correct adapter plate lets you install your sight securely without guesswork. Start by confirming your Glock MOS model’s footprint, then carefully follow the mounting steps to get your optic aligned and tightened properly. Taking this first step will improve your shooting setup by adding fast, precise target acquisition to your pistol.
One Comment