Will a Glock 47 Fit in a Glock 17 Holster? A Complete Compatibility Guide
A Glock 47 usually fits into a Glock 17 holster. The frames of both models share very similar sizes, which allows for most holsters to work with either one, particularly if you don’t have optics or lights attached. This information is useful if you own a Glock 17 holster and plan to acquire a Glock 47.
This overview is for Glock owners curious about holster compatibility between these two models. You’ll learn about the dimensional similarities and differences, which holster styles work best, how accessories affect fit, and when a dedicated Glock 47 holster becomes necessary.
Key Takeaways
- The Glock 47 fits most Glock 17 holsters due to nearly identical frame and slide dimensions.
- The Glock 47’s shorter dust cover does not negatively affect holster fit or retention.
- Holsters designed for slimmer grip models like Glock 19 or 48 may cause fit issues when used with the Glock 47.
- Adding optics or weapon lights to the Glock 47 requires holsters with appropriate clearance to ensure proper fit.
- Generational differences, especially between Glock 17 Gen4 and Gen5, can affect fitting in older holsters.
- Testing your Glock 47 in a Glock 17 holster before relying on carry is recommended to confirm secure retention.
Does a Glock 47 Fit in a Glock 17 Holster?
The Glock 47 slides smoothly into holsters made for the Glock 17 because they share almost the same slide size and shape. Holster retention depends mostly on the slide’s profile and length. Although the Glock 47 has a shorter dust cover, it doesn’t impact how well the holster holds the gun. Holsters typically grip around the slide, not the dust cover or frame extension.
For holsters designed with adjustable retention, such as many Kydex or hybrid holsters, you can fine-tune how tightly the Glock 47 fits inside a Glock 17 holster. This adjustment compensates for any minor differences resulting from the shorter dust cover, ensuring a secure hold without compromising quick draw capability. Open-bottom holsters especially accommodate length differences well, so the Glock 47’s shorter dust cover does not reduce retention or safety in these designs.
Some holsters made exclusively for compact models or specifically for the Glock 19 might offer a better fit for the Glock 47’s shortened dust cover, but many full-size Glock 17 holsters remain compatible. Retention concerns rarely arise because holsters lock on slide dimensions, which remain consistent between the Glock 17 and Glock 47. Safety also isn’t affected since a properly fitting holster covers the trigger guard fully and holds the slide firmly without depending on the dust cover length.
In practice, you’ll want to verify the specific holster’s compatibility based on its design and retention style. While Glock 17 holsters often fit the Glock 47 well, some users prefer a dedicated Glock 47 holster for tailored coverage, especially if using optical sights or weapon lights that alter the firearm’s profile. For standard models without these modifications, a Glock 17 holster typically provides a secure and functional fit for a Glock 47 with no significant drawbacks related to the shorter dust cover.
Comparing Glock 17 and Glock 47 Dimensions for Holster Fit
The Glock 47 and Glock 17 share nearly identical slide lengths and widths, which are the key dimensions holsters use to secure the firearm. Both feature a slide length of 114 mm (4.49 in), and their slide widths are almost the same. This similarity means holsters that fit the slide of a Glock 17 generally fit the Glock 47 as well. The main area of difference lies in the frame, specifically the dust cover length, which is shortened on the Glock 47. However, since most holsters primarily grip the slide and upper frame areas, the shorter dust cover causes minimal impact on fit.
Additional frame dimension factors such as width, grip length, and height also closely match between the two models. Minor ergonomic changes, like trigger guard shape and accessory rail geometry, do not significantly affect the external clinch points the holster engages with. This dimension alignment explains why many manufacturers consider the Glock 47 and Glock 17 interchangeable when designing holsters.
| Feature | Glock 17 | Glock 47 |
|---|---|---|
| Slide Length | 114 mm (4.49 in) | 114 mm (4.49 in) |
| Slide Width | Nearly identical | Nearly identical |
| Dust Cover Length | Standard full length | Shortened dust cover |
| Frame Width | Full-size frame width | Full-size frame width, close match |
| Grip Length | Standard full-size grip | Standard full-size grip |
| Height | Comparable full-size height | Comparable full-size height |
Since holsters often rely on slide length and width for retention, the dimension match between the Glock 17 and Glock 47 enables the use of existing holsters interchangeably. You should inspect your holster’s retention points and consider accessories like optics or weapon lights, which may require additional clearance not accounted for by frame dimensions. When trying a Glock 47 in a Glock 17 holster, ensure the fit is secure without excessive play or overly tight spots that could cause difficulty in drawing or returning the pistol.
Check how your holster handles the trigger guard and accessory rail area, since small frame contour differences can slightly affect retention even when slide dimensions align.
Which Holster Styles Work Best for Glock 47 and Glock 17?
Most holsters designed for the Glock 17 also fit the Glock 47 because the slide and frame sizes are nearly identical. Holsters like inside-the-waistband (IWB), outside-the-waistband (OWB), paddle, and duty types can accommodate both guns. However, each style offers different levels of retention, comfort, and concealment, which affects their suitability for your preferred carry setup. Your choice should reflect the carry method you plan to use and whether your Glock 47 includes optics or light attachments.
Inside-the-Waistband Holsters for Both Models
IWB holsters are popular for concealed carry with both Glock 17 and Glock 47 because they tuck the pistol inside the waistband for better concealment. The Glock 47’s size matches well with holsters designed for the Glock 17 Gen 5, including models like the Cloak Tuck 3.5, which is known for spreading the weapon’s weight on a CoolVent neoprene backer. This provides all-day comfort while maintaining secure retention and quick draw capabilities. Tool-free adjustable cant and ride height let you customize the fit to your body and style of dress.
These IWB holsters typically accommodate full-size frames without adding bulk or discomfort, making them a reliable choice if you prioritize concealability. Although optics or weapon lights can complicate IWB carrying, some dedicated holsters, like the Photon series, convert easily between IWB and OWB and clear mounted optics or compact lights on the Glock 47.
Outside-the-Waistband and Paddle Options
OWB holsters offer easier accessibility and comfort for extended wear by carrying the firearm outside the pants. Many OWB holsters made for the Glock 17 Gen 1 through Gen 5 family, including MOS variants, fit the Glock 47 well because of the near-identical slide and overall dimensions. These holsters typically provide superb retention and swift draws, making them suitable for both daily carry and training.
Paddle holsters, a subset of OWB, attach to pants with a paddle-shaped backing and provide convenient on/off without belt removal. They’re well-suited for Glock 47 users who want quick access and a non-permanent holster setup. The slightly larger profile compared to clip-on or belt-slide OWB holsters trades off some concealability for comfort and speed.
- OWB holsters often have adjustable tension or active retention levels.
- Paddle holsters allow tool-free installation and removal while maintaining position.
- Both types support optics-ready models and compact weapon lights with the right design.
- OWB options can be used for open or concealed carry depending on clothing.
- Some leather pancake holsters fit both IWB and OWB carry styles.
- Retention adjustments are key to balancing security and draw smoothness.
- Expect prices from $40 for basic models to $150 for premium custom molded holsters.
Both OWB and paddle styles can accommodate mounted red dots or small lights if you select holsters labeled for such setups. Look for those specifically molded for Glock 17/47 MOS or optics-ready variants to ensure a snug fit that won’t interfere with attachments.
Duty and Active Retention Holsters
Duty holsters provide higher retention levels to prevent unauthorized draws, making them the best option for law enforcement or users who want added security. Holsters like the Rapid Force series offer Level II or Level III retention systems compatible with Glock 47 and its family members. These holsters often feature locking mechanisms activated by thumb or pressure releases, ensuring your pistol stays secured under strenuous activity.
Duty holsters are usually OWB mounted and built from durable materials such as reinforced polymer or leather. Their active retention features are especially important if you carry your Glock 47 with mounted lights or optics as these holsters are designed to accommodate the added bulk while preserving retention strength.
Use these holsters when safety and security outweigh concealment needs. They are more bulky and visible, so they are not ideal for concealed carry but excel in duty-style applications or range use where retention and draw speed are critical.
How Optics and Weapon Lights Affect Holster Compatibility
Glock 17 holsters generally fit the Glock 47 when both guns are bare, but any mounted red dot optic or weapon light changes the fit drastically. Optics and lights extend beyond the G17’s profile, so standard G17 holsters often won’t clear these attachments on the G47. Choosing dedicated optic-cut or light-compatible holsters designed to accommodate these additions is necessary for reliable draw and retention.
Identifying Optic-Ready Holster Features
Holsters designed to fit Glock 47 with mounted optics have precision-cut channels that match common red dot shapes and sizes. These optic-ready holsters avoid tight spots around the mounted sight, preventing damage and allowing smooth draw and reholster actions. Look for holsters labeled as compatible with Glock Modular Optic System (MOS) configurations, which share optics footprints across Glock 17, 47, and 49 models.
Features to confirm include an optic channel matched to the specific red dot, reinforced walls around the cutout for retention without wobble, and materials designed to resist abrasion from the optic housing. Optic-ready holsters can range from $40 for simpler kydex options up to $150+ for premium leather or tactical models.
Accommodating Weapon Lights on Glock Holsters
Weapon lights add both length and girth to the Glock’s dust cover area, changing holster geometry. Holsters that fit Glocks without lights may pinch or fail to close properly if a light is mounted. Holsters suitable for the Glock 47 with a weapon light often feature an open-bottom design to clear longer light barrels and adjustable retention screws to fine-tune grip tension.
To handle the varied sizes of weapon lights, look for holsters marketed as “Light Bearing” or specifically designed for the light model you own. Duty holsters with reinforced light compartments keep the light secure while allowing quick presentation. Costs typically start around $70 for light-compatible models and go higher depending on construction and brand.
Using MOS Holsters with Mounted Accessories
MOS holsters accommodate both optics and lights by combining optic-cut channels with deeper dust cover bays or modular inserts. These holsters ensure draw smoothness by precisely fitting the G47’s slide, mounted red dot, and accessory rail with weapon lights. Using a holster not made for MOS configurations risks jamming on the optic or light, damaging attachments, or causing slow, awkward draws.
The key is ensuring your holster matches both the red dot footprint and the specific light size if equipped. Most Glock 47 MOS owners find better security and convenience in holsters explicitly listed as MOS-compatible with light-bearing options instead of generic Glock 17 holsters. Follow these steps to select an optics-ready holster for your Glock 47 setup:
- Identify your optic model and its footprint (e.g., Aimpoint, Trijicon RMR) on the Glock 47 MOS slide.
- Measure or verify your weapon light make and size if mounted on the accessory rail.
- Search holsters labeled “optic-compatible” or “MOS holster” matching Glock 17/47/49 MOS footprints.
- Check product descriptions for light-bearing compatibility or adjustable retention features.
- Confirm material durability and type (kydex, leather, polymer) to fit your environment and carry style.
- Read reviews or manufacturer notes about retention and draw smoothness with your specific optic and light.
- If possible, try the holster with your firearm and attachments for clearance and fit before purchase.
- Adjust retention screws or inserts as allowed to achieve secure hold without binding or delay during draw.
Generational Differences Impacting Glock 17 and 47 Holster Fit
Older Glock 17 holsters designed for Gen4 frames generally fit Glock 47 Gen5 or Gen6 models but not perfectly. Glock confirmed that Gen5 introduced over twenty design changes from Gen4, leading to measurable dimensional shifts. These changes include refinements in frame contours, slight adjustments in dust-cover geometry, and trigger guard shape. As a result, holsters molded specifically for Gen4 G17s might show minor gaps or tighter retention pockets when used with a Gen5 or Gen6 Glock 47, even though the overall external dimensions remain close.
The Glock 47’s frame aligns closely with the G17, especially in width and height, ensuring most Glock 17 holsters accommodate it. The slide dimensions match closely as well, which helps holster cross-compatibility. However, subtle changes introduced in the Gen6 frames, such as altered texture patterns or slight rail contour differences, can affect how the firearm seats in some holsters, particularly those with rigid molds or fixed retention points. These mold changes can cause a holster made for a Gen4 frame to feel either loose or overly tight with a Gen6 Glock 47.
Retention systems vary across holster models rather than generations, but they can influence how a Glock 47 fits in a G17 holster. Some holsters use mechanical retention snaps or adjustable tension screws that allow adaptation to frame variations. Flexible materials like Kydex, common in modern holsters, adjust better to the minor dimensional differences between Gen4, Gen5, and Gen6 Glock frames. In contrast, leather or traditional molded holsters made precisely for a specific Glock generation might not accommodate these subtle changes as easily, which may impact security or quick-draw performance.
For example, a fixed-mold Glock 17 Gen4 holster can physically hold a Glock 47 Gen6, but the difference in frame dust cover contour or rail design might cause the retention pressure to be either too high or too slack. Users relying on tight retention for duty use should verify fit in person. Trusted holster makers often release updated molds for each Glock generation to address these nuances, underscoring the benefit of dedicated models when consistent retention and draw are critical.
Always test your Glock 47 in a Glock 17 holster before relying on it daily, especially if your holster was crafted for a previous generation frame.
The Gen4-to-Gen5 shift best illustrates these points; despite over twenty design changes, the base frame dimensions remained similar enough for many holsters to work interchangeably. However, pistol models with rails or accessory slots that interact with the holster molding may reveal fit discrepancies. This makes holsters with adjustable retention preferable for cross-generational use.
Ultimately, while most Glock 17 holsters offer functional compatibility with the Glock 47 Gen5 or Gen6, verifying proper seat, retention, and comfort is key to safe carry. This means checking for holsters that either account for generational differences or provide flexible retention adjustments. Investing in a holster molded specifically for the Glock 47 frame delivers the best fit and retention but comes at a slightly higher cost than using a shared Glock 17 holster.
Testing and Verifying Glock 47 Fit in a Glock 17 Holster
Testing whether a Glock 47 fits properly in a Glock 17 holster involves a careful hands-on approach that checks for secure retention, smooth draw, and safe holster engagement. Since the Glock 47 shares nearly identical slide and frame dimensions with the Glock 17, the fit often works but verifying is essential to avoid damage or unsafe handling. This step-by-step process helps you evaluate fit without risking your firearm or holster.
Preparing the Firearms and Holster for Testing
Start by ensuring your Glock 47 and the Glock 17 holster you want to test are clean and unloaded. This eliminates the risk of accidental discharge and prevents dirt or debris from affecting retention or fit. Verify the holster’s mounting system is secure, whether it’s belt, paddle, or another attachment style. Adjust the retention screws to the factory or recommended baseline setting before testing for the most accurate fit assessment.
Check the holster’s interior for any signs of wear or deformation, as repeated use can alter holster geometry over time. Using a holster with adjustable retention is ideal because you can fine-tune fit based on your Glock 47’s specific characteristics, including any optic or accessory modifications that might affect fit.
Stepwise Fit and Retention Checks
Begin testing with a series of methodical steps focused on safe insertion and retention evaluation. The goal is to confirm that insertion feels natural, the pistol sits securely without excessive movement, and cannot be dislodged with simple maneuvers.
- Make sure the firearm is unloaded and magazine removed. Double-check visually and physically.
- Hold the holster steadily, insert the Glock 47 slowly and completely. Note any resistance or unusual tightness.
- Observe if the gun seats fully to its retention point without gaps or misalignment. Partial seating can signal incompatibility or risk of wear.
- Apply gentle forward pressure to check if the firearm shifts or wiggles excessively. Slight movement is allowed but not enough to feel loose or unstable.
- Use your thumb or finger to engage retention adjustment screws and tighten incrementally. Test reinsertion and seating after each tweak for optimal snugness.
- Perform light shaking or movement of the holster while holding the firearm to test retention under motion. The gun should not fall out or shift in a way that would hinder draw consistency.
Retention issues worth attention include the firearm slipping out when tilted or moved, gaps between holster and gun, and difficulty in fully holstering due to size constraints. Poor retention can risk firearm loss or damage during activity.
Assessing Draw and Reholster Smoothness
Evaluating the ease and safety of drawing and reholstering the Glock 47 from the Glock 17 holster is essential for practical carry. The firearm should come out smoothly with moderate resistance for security, and it should slide back in without excessive force or catching.
Conduct repeated draws and reholsters under slow controlled conditions. Note any hesitation points, binding areas, or irregular sound like scraping that could indicate tight fit or rough edges. A consistent, smooth draw without twisting the wrist or adjusting grip points confirms compatibility. When reholstering, avoid forcing the firearm; it should seat easily while maintaining retention.
If you experience persistent sticking, uneven retention, or difficulty aligning the pistol during draw or holstering, consider discontinuing use. These issues increase wear and risk injury or accidental discharge. In cases of poor performance, look for holsters specifically molded for the Glock 47 or adjustable models engineered to accommodate its design.
When to Choose a Dedicated Glock 47 Holster Instead
Choosing a dedicated Glock 47 holster becomes important when you need the best fit and security tailored to this specific model. The Glock 47 has unique dimensions and features compared to the Glock 17, so a holster designed exclusively for it often provides optimal retention and comfort. This is critical if you carry your Glock 47 daily or use it in professional environments where quick access and reliable retention matter most.
For professionals such as law enforcement officers or security personnel, a Glock 47 duty holster must offer Level 2 retention, ensuring the firearm stays secure during active duty. These holsters are molded or adjustable to match the Glock 47’s frame and slide precisely, reducing unwanted movement and improving weapon draw speed. A well-fit dedicated holster often has adjustable retention screws and cant angles, which help customize the fit to your draw style and body type, improving comfort especially during long shifts.
In concealed carry scenarios, comfort and concealability become priorities. A Glock 47 holster designed specifically for that model reduces pressure points and prevents printing by contouring exactly to the gun’s shape. This can significantly improve comfort and help you carry discreetly all day. Also, if you use weapon accessories like lights or optics attached to your Glock 47, dedicated holsters designed to accommodate these add-ons offer better compatibility. Adjustable or modular holsters meant for the Glock 47 allow you to upgrade or swap accessories without buying a completely new holster, preserving comfort and retention.
If you’re selecting between a Glock 17 holster and a dedicated Glock 47 holster, use a simple decision rule: prioritize a dedicated Glock 47 holster if you carry the firearm regularly, require maximum retention and security, or use accessories that alter the gun’s profile. It might cost you $70 to $120 or more depending on the holster style and retention level, but you gain peace of mind and better handling. Using an off-model holster may be acceptable for occasional carry or casual use where perfect fit and retention are less critical, but it risks decreased comfort and less secure firearm retention.
Good results from using a dedicated Glock 47 holster include consistent positioning, quick and smooth draws, and the absence of excess firearm movement during activities. Poor results often show up as difficulty drawing the weapon fluidly, uncomfortable pressure points on the body, or loosening retention screws that cause the gun to wobble in the holster. Adjustable retention screws and holsters molded precisely to the Glock 47’s dimensions help avoid these issues. Customizing cant angles also ensures the holster matches your preferred carry method, whether appendix, strong side, or behind the hip.
Common Myths and Misconceptions About Glock Holster Compatibility
Many people mistakenly believe the Glock 47 is just a Glock 17 with a shorter dust cover. The dust cover on the Glock 47 is indeed shorter, but the slide’s total length is the same as the Glock 17’s. Because holsters rely mainly on the slide length for fit, the shorter dust cover doesn’t change how holsters fit. Most holsters made for the Glock 17 will fit the Glock 47 without problems.
Another misconception is that all Glock 17 holsters will automatically fit optic-ready Glock 47 models. Since the Glock 47 MOS comes from the factory with modular optics-ready cuts, it requires holsters designed for optics. A standard Glock 17 holster without optics cut will not properly fit an optic-ready Glock 47. You need a holster specifically engineered to accommodate the optics footprint on the Glock 47 MOS to ensure a secure, functional fit.
Some worry that using a Glock 17 holster on a Glock 47 might cause holster wear or damage the firearm. Because the Glock 47’s slide length and overall dimensions closely match the Glock 17’s, using the holster for either firearm will not damage the gun or the holster under normal use. However, forcing an optic-ready Glock 47 into a non-optics Glock 17 holster can cause unnecessary wear or poor retention. Always check for holster compatibility before use to avoid undue stress on the holster material or the firearm finish.
Understanding these details matters because mistaken assumptions about holster compatibility can lead to fitting issues or damage over time. Manufacturers design holsters around the slide length and specific features like optics cuts. The only significant difference between a Glock 17 and Glock 47 holster fit is if the holster accommodates optics or not. Even then, the shorter dust cover on the Glock 47 does not change the holster fit since it is located below the slide, which is the main determining dimension.
To avoid confusion, always verify holster specs before purchase. Choose a holster specifically designed for the MOS or optics-ready version if your Glock 47 includes these features. For a standard Glock 47 without optics, a Glock 17 holster made for the Gen 5 model typically works well. Trying the fit in person or checking with the holster maker can prevent unexpected problems. Expect a properly matched holster to provide firm retention, easy draw, and minimal wear after repeated use.
Always confirm your Glock 47’s configuration, optic-ready or not, before choosing a holster to prevent fit and retention issues that harm your gun or holster.
Quick-Start Action Plan for Using Your Glock 47 with a Glock 17 Holster
Follow these steps to quickly test your Glock 47 in a Glock 17 holster and decide if you need a dedicated holster.
- Before you start: Inspect the Glock 47 and your Glock 17 holster for obvious fit differences, such as length and width. This helps you anticipate potential issues.
- Day 1: Insert the Glock 47 gently into the Glock 17 holster to check for a physical fit. It should slide in without forcing and hold securely without excessive looseness.
- Day 2: Test drawing and reholstering your Glock 47 from the Glock 17 holster a few times. Smooth operation without resistance shows good initial compatibility.
- Within one week: Add any accessories like optics or weapon lights to your Glock 47 and test fit again. Note if these additions interfere with holster retention or drawing.
- After 1 week: Evaluate how the holster wears on you during daily carry or dry-fire practice. Comfort and retention over time indicate satisfactory fit.
- After 2 weeks: Decide if you experience any issues like inconsistent retention, difficult draws, or discomfort. Consider purchasing a dedicated Glock 47 holster if problems arise.
- Ongoing: Regularly inspect holster and firearm wear to ensure continued compatibility and safety when carrying.
Frequently Asked Questions
Will a Glock 47 Fit in a Glock 17 Holster?
Yes, a Glock 47 will generally fit in a Glock 17 holster since their frame dimensions closely match, but check for any optic or light attachments.
Can You Use a Glock 17 Holster with a Glock 47 That Has an Optic?
Using a Glock 17 holster for a Glock 47 with an optic may cause fit issues, so look for holsters designed to accommodate optics.
Does the Shorter Dust Cover on the Glock 47 Affect Holster Retention?
The shorter dust cover on the Glock 47 does not impact holster retention or fit in a Glock 17 holster.
Are Holsters for Glock 19 or 48 Less Compatible with the Glock 47?
Holsters designed for Glock 19 or 48, which have longer grips, may not fit the Glock 47 as well due to size differences.
Will a Gen 5 Glock 17 Fit in a Holster Made for Gen 4 Glock 17?
No, a Gen 5 Glock 17 may not fit correctly in a holster molded for Gen 4 due to slight design differences.
Is a Dedicated Glock 47 Holster Necessary If I Already Have a Glock 17 Holster?
Generally not if your Glock 47 is bare; dedicated holsters only needed for optics or lights.
Final Thoughts
Your Glock 47 may fit in a Glock 17 holster, but fit depends on specific holster design, accessories, and personal preference. Testing the fit carefully before committing is key. Next, check holster makers’ recommendations or try a dedicated Glock 47 holster to ensure optimal safety and comfort during carry.